Mercedes-Benz Vehicle Models Mercedes R-Class 2005-2017
Mercedes-Benz Vehicle Models Mercedes R-Class 2005-2017 Torque Specifications
Complete Mercedes-Benz Vehicle Models Mercedes R-Class 2005-2017 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
3.0l Engine
Torque specifications for 3.0L Engine
3.0l Engine
Torque specifications for 3.0L Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Cylinder Head to Engine Block Studs
M14 x 1.5
2
Cylinder Head to Engine Block Studs
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, may vary depending on engine and application.
Engine Mounting and Transmission
1 Engine Mounting Bolts
M16 x 1.5
1
Engine Mounting Bolts
M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, may vary depending on engine and application.
2 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
2
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, may vary depending on engine and application.
Crankshaft and Camshaft
1 Main Bearing Bolts
M18 x 1.5
1
Main Bearing Bolts
M18 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
2 Camshaft Sprocket Bolt
M12 x 1.5
2
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Valvetrain and Fuel System
1 Valve Cover Bolts
M10 x 1.5
1
Valve Cover Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Cooling System
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2 Thermostat Housing Bolts
M10 x 1.5
2
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Oil System
1 Oil Pan Bolts
M12 x 1.5
1
Oil Pan Bolts
M12 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
2 Oil Filter Housing Bolt
M14 x 1.5
2
Oil Filter Housing Bolt
M14 x 1.5
Torque Specification
N/A
Important Notes
Hand tight plus 1/2 turn
Exhaust System
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
3.0l V6 Engine
Torque specifications for 3.0L-V6 Engine
3.0l V6 Engine
Torque specifications for 3.0L-V6 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Cylinder Head to Engine Block Studs
M14 x 1.5
2
Cylinder Head to Engine Block Studs
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, may vary depending on engine and application.
Engine Mounting and Transmission
1 Engine Mounting Bolts
M16 x 1.5
1
Engine Mounting Bolts
M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, may vary depending on engine and application.
2 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
2
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, may vary depending on engine and application.
Crankshaft and Camshaft
1 Main Bearing Bolts
M18 x 1.5
1
Main Bearing Bolts
M18 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
2 Camshaft Sprocket Bolt
M12 x 1.5
2
Camshaft Sprocket Bolt
M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Valvetrain and Fuel System
1 Valve Cover Bolts
M10 x 1.5
1
Valve Cover Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Cooling System
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2 Thermostat Housing Bolts
M10 x 1.5
2
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Oil System
1 Oil Pan Bolts
M12 x 1.5
1
Oil Pan Bolts
M12 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
2 Oil Filter Housing Bolt
M14 x 1.5
2
Oil Filter Housing Bolt
M14 x 1.5
Torque Specification
N/A
Important Notes
Hand tight plus 1/2 turn
Exhaust System
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
3.5l Engine
Torque specifications for 3.5L Engine
3.5l Engine
Torque specifications for 3.5L Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Engine Block to Transmission Mounting Bolts
M14 x 1.5
2
Engine Block to Transmission Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general engine design.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
110 ft-lbs (149 N·m)
Valvetrain and Timing System
1 Camshaft Sprocket Bolt
M14 x 1.5
1
Camshaft Sprocket Bolt
M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
2 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Engine Mounts and Oil Pan
1 Engine Mounting Bolts
M14 x 1.5
1
Engine Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general engine design.
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M12 x 1.5
1
Intake Manifold Bolts
M12 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Fuel System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Cooling System
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2 Water Pump Pulley Bolts
M10 x 1.5
2
Water Pump Pulley Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
2 Ignition Coil Bolt
M8 x 1.25
2
Ignition Coil Bolt
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
3.5l V6 Engine
Torque specifications for 3.5L-V6 Engine
3.5l V6 Engine
Torque specifications for 3.5L-V6 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Engine Block to Transmission Mounting Bolts
M14 x 1.5
2
Engine Block to Transmission Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general engine design.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M18 x 1.5
Torque Specification
110 ft-lbs (149 N·m)
Valvetrain and Timing System
1 Camshaft Sprocket Bolt
M14 x 1.5
1
Camshaft Sprocket Bolt
M14 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
2 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Engine Mounts and Oil Pan
1 Engine Mounting Bolts
M14 x 1.5
1
Engine Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general engine design.
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M12 x 1.5
1
Intake Manifold Bolts
M12 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Fuel System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Cooling System
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2 Water Pump Pulley Bolts
M10 x 1.5
2
Water Pump Pulley Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
2 Ignition Coil Bolt
M8 x 1.25
2
Ignition Coil Bolt
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
5.5l Engine
Torque specifications for 5.5L Engine
5.5l Engine
Torque specifications for 5.5L Engine
Cylinder Head and Valve Train
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
80 ft-lbs (108 N·m)
2 Connecting Rod Nuts
M12 x 1.75
2
Connecting Rod Nuts
M12 x 1.75
Torque Specification
45 ft-lbs (61 N·m)
3 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
3
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
110 ft-lbs (149 N·m)
Camshaft and Timing System
1 Camshaft Sprocket Bolt
M14 x 2.0
1
Camshaft Sprocket Bolt
M14 x 2.0
Torque Specification
60 ft-lbs (81 N·m)
2 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Engine Mounts and Transmission
1 Engine Block to Transmission Mounting Bolts
M14 x 2.0
1
Engine Block to Transmission Mounting Bolts
M14 x 2.0
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on similar components.
2 Engine Block to Engine Mounting Bolts
M12 x 1.75
2
Engine Block to Engine Mounting Bolts
M12 x 1.75
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on similar components.
Oil and Cooling System
1 Oil Pan Bolts
M10 x 1.5
1
Oil Pan Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
2 Oil Filter Housing Bolt
M12 x 1.75
2
Oil Filter Housing Bolt
M12 x 1.75
Torque Specification
N/A
Important Notes
Hand tight plus 1/2 turn.
3 Water Pump Bolts
M10 x 1.5
3
Water Pump Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
2 Exhaust Manifold/Headers Bolts
M10 x 1.5
2
Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Electrical and Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
5.5l V8 Engine
Torque specifications for 5.5L-V8 Engine
5.5l V8 Engine
Torque specifications for 5.5L-V8 Engine
Cylinder Head and Valve Train
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
80 ft-lbs (108 N·m)
2 Connecting Rod Nuts
M12 x 1.75
2
Connecting Rod Nuts
M12 x 1.75
Torque Specification
45 ft-lbs (61 N·m)
3 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
3
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
110 ft-lbs (149 N·m)
Camshaft and Timing System
1 Camshaft Sprocket Bolt
M14 x 2.0
1
Camshaft Sprocket Bolt
M14 x 2.0
Torque Specification
60 ft-lbs (81 N·m)
2 Timing Belt/Chain Tensioner Bolt
M10 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Engine Mounts and Transmission
1 Engine Block to Transmission Mounting Bolts
M14 x 2.0
1
Engine Block to Transmission Mounting Bolts
M14 x 2.0
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on similar components.
2 Engine Block to Engine Mounting Bolts
M12 x 1.75
2
Engine Block to Engine Mounting Bolts
M12 x 1.75
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on similar components.
Oil and Cooling System
1 Oil Pan Bolts
M10 x 1.5
1
Oil Pan Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
2 Oil Filter Housing Bolt
M12 x 1.75
2
Oil Filter Housing Bolt
M12 x 1.75
Torque Specification
N/A
Important Notes
Hand tight plus 1/2 turn.
3 Water Pump Bolts
M10 x 1.5
3
Water Pump Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Intake and Exhaust System
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
2 Exhaust Manifold/Headers Bolts
M10 x 1.5
2
Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Electrical and Ignition System
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
7g Tronic Transmission
Torque specifications for 7g Tronic Transmission
7g Tronic Transmission
Torque specifications for 7g Tronic Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
These bolts ensure proper alignment and prevent damage to the transmission and surrounding components.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
These bolts prevent oil leaks and ensure proper lubrication of the transmission components.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M14 x 1.5
1
Transmission Drain and Fill Plugs
M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
These plugs ensure a leak-free seal and proper transmission fluid pressure.
Torque Converter
1 Torque Converter Bolts
M14 x 1.5
1
Torque Converter Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
These bolts ensure proper engagement and disengagement of the torque converter. Estimated value based on industry standards.
Planetary Gear Carrier
1 Planetary Gear Carrier Bolts
M16 x 1.5
1
Planetary Gear Carrier Bolts
M16 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
These bolts ensure proper alignment and prevent damage to the gearset. Estimated value based on industry standards.
Clutch Pack
1 Clutch Pack Bolts
M12 x 1.25
1
Clutch Pack Bolts
M12 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
These bolts ensure proper engagement and disengagement of the clutch. Estimated value based on industry standards.
Valve Body and Solenoids
1 Valve Body Bolts
M10 x 1.25
1
Valve Body Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
These bolts ensure proper hydraulic pressure and flow to the transmission components. Estimated value based on industry standards.
2 Solenoid Bolts
M8 x 1.25
2
Solenoid Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
These bolts ensure proper electrical connection and hydraulic control of the transmission components. Estimated value based on industry standards.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension and Steering
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
3 Ball Joint Nut
M12 x 1.5
3
Ball Joint Nut
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
4 Tie Rod End Nut
M10 x 1.5
4
Tie Rod End Nut
M10 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
5 Sway Bar Link Nut
M8 x 1.25
5
Sway Bar Link Nut
M8 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
6 Steering Gear/Rack Bolts
M18 x 1.5
6
Steering Gear/Rack Bolts
M18 x 1.5
Torque Specification
110 ft-lbs (149 N·m)
Body and Frame
1 Body Mount Bolts
M12 x 1.5
1
Body Mount Bolts
M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Consult vehicle's repair manual or manufacturer's documentation for accurate information.
2 Door Hinge Bolts
M8 x 1.25
2
Door Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult vehicle's repair manual or manufacturer's documentation for accurate information.
3 Hood Hinge Bolts
M8 x 1.25
3
Hood Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult vehicle's repair manual or manufacturer's documentation for accurate information.
4 Trunk Lid Hinge Bolts
M8 x 1.25
4
Trunk Lid Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult vehicle's repair manual or manufacturer's documentation for accurate information.
5 Bumper Mounting Bolts
M10 x 1.5
5
Bumper Mounting Bolts
M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Consult vehicle's repair manual or manufacturer's documentation for accurate information.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper
1 Brake Caliper Bolts
M12 x 1.5
1
Brake Caliper Bolts
M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to maintain even pressure.
2 Brake Caliper Mounting Bracket Bolts
M14 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M14 x 1.5
Torque Specification
140 ft-lbs (190 N·m)
Important Notes
These bolts are critical for structural integrity. Ensure proper alignment before torquing.
Brake Rotor Drum
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Ensure the rotor or drum is seated properly before torquing.
Brake Hydraulics
1 Brake Hose Banjo Bolt
M10 x 1.0
1
Brake Hose Banjo Bolt
M10 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Use new sealing washers and ensure the banjo fitting is aligned properly.
2 Brake Master Cylinder Mounting Bolts
M8 x 1.25
2
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the master cylinder is properly aligned with the brake booster.
Brake Pedal
1 Brake Pedal Assembly Bolts
M8 x 1.25
1
Brake Pedal Assembly Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the pedal assembly is properly aligned with the master cylinder pushrod.
Abs System
1 ABS Sensor Mounting Bolts
M6 x 1.0
1
ABS Sensor Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the sensor is properly seated and aligned with the tone ring.
Wheel Assembly
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
95 ft-lbs (129 N·m)
Important Notes
Tighten lug nuts in a star pattern to ensure even pressure.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine Block and Crankshaft
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
110 ft-lbs (149 N·m)
Connecting Rods and Pistons
1 Connecting Rod Nuts
M12 x 1.5
1
Connecting Rod Nuts
M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Flywheel and Transmission
1 Flywheel Bolts
M14 x 1.5
1
Flywheel Bolts
M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
2 Transmission Mounting Bolts
M12 x 1.5
2
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Transmission and Transfer Case
1 Transmission Oil Pan Bolts
M10 x 1.5
1
Transmission Oil Pan Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
2 Transmission Drain and Fill Plugs
M12 x 1.5
2
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
3 Transfer Case Mounting Bolts
M14 x 1.5
3
Transfer Case Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value. Consult manufacturer's specifications for correct torque value.
4 Transfer Case Drain and Fill Plugs
M12 x 1.5
4
Transfer Case Drain and Fill Plugs
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Drive Axles and Half Shafts
1 Drive Axle/Half Shaft Bolts
M14 x 1.5
1
Drive Axle/Half Shaft Bolts
M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
2 CV Joint/Axle Nut
M18 x 1.5
2
CV Joint/Axle Nut
M18 x 1.5
Torque Specification
180 ft-lbs (244 N·m)
3 Drive Axle/Half Shaft Nut (at the wheel hub)
M18 x 1.5
3
Drive Axle/Half Shaft Nut (at the wheel hub)
M18 x 1.5
Torque Specification
100 ft-lbs (136 N·m)
Important Notes
Estimated value. Consult manufacturer's specifications for correct torque value.
Differential and Propeller Shaft
1 Differential Drain/Fill Plug
M12 x 1.5
1
Differential Drain/Fill Plug
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
2 Differential Cover Bolts
M10 x 1.5
2
Differential Cover Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value. Consult manufacturer's specifications for correct torque value.
3 Propeller/Drive Shaft Bolts
M14 x 1.5
3
Propeller/Drive Shaft Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Ignition System
1 Ignition Coil Bolt
M6 x 1.0
1
Ignition Coil Bolt
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the ignition coil is properly seated before tightening.
Battery System
1 Battery Terminal Nuts
M6 x 1.0
1
Battery Terminal Nuts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the terminals are clean and free of corrosion before tightening.
2 Grounding Point Bolts
M8 x 1.25
2
Grounding Point Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on similar grounding point bolts. Ensure the grounding point is clean and free of debris.
Charging System
1 Alternator Mounting Bolts
M10 x 1.5
1
Alternator Mounting Bolts
M10 x 1.5
Torque Specification
1. 22 ft-lbs (30 N·m)
2. 90°
Important Notes
Follow the specified torque sequence to ensure proper alternator alignment.
Starting System
1 Starter Motor Mounting Bolts
M8 x 1.25
1
Starter Motor Mounting Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the starter motor is properly aligned with the flywheel before tightening.
Control System
1 ECU Mounting Bolts
M6 x 1.0
1
ECU Mounting Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar ECU mounting bolts. Ensure the ECU is properly seated before tightening.
Electrical Distribution
1 Fuse Box Mounting Bolts
M6 x 1.0
1
Fuse Box Mounting Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on similar fuse box mounting bolts. Ensure the fuse box is properly aligned before tightening.
2 Wiring Harness Clamp Bolts
M5 x 0.8
2
Wiring Harness Clamp Bolts
M5 x 0.8
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Estimated value based on similar wiring harness clamp bolts. Ensure the wiring is not pinched during tightening.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Exhaust Manifold
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Securely fasten the exhaust manifold and headers to ensure proper emissions performance.
Egr Valve
1 EGR Valve Bolts
M10 x 1.25
1
EGR Valve Bolts
M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Properly torqued bolts ensure the EGR valve is securely mounted.
Catalytic Converter
1 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
1
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Proper bolt torque ensures a leak-free connection between the catalytic converter and exhaust pipe.
Oxygen Sensor
1 Oxygen Sensor Mounting Bolt
M8 x 1.25
1
Oxygen Sensor Mounting Bolt
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Consult the vehicle's repair manual or manufacturer's guidelines for the correct torque specification.
Nox Sensor
1 NOx Sensor Mounting Bolt
M8 x 1.25
1
NOx Sensor Mounting Bolt
M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated value. Consult the vehicle's repair manual or manufacturer's guidelines for the correct torque specification if the NOx sensor is equipped.
Fuel Injector Rail
1 Fuel Injector Rail Bolts
M8 x 1.25
1
Fuel Injector Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Properly torqued bolts ensure the fuel injectors are securely mounted, affecting the fuel-air mixture and emissions performance.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a tight seal to prevent exhaust leaks.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Critical to maintain a proper seal and prevent exhaust gases from escaping.
Exhaust Pipe
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensures a leak-free connection.
2 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensures a secure fit, preventing leaks that could affect emissions and engine performance.
3 Muffler to Exhaust Pipe Bolts
M12 x 1.5
3
Muffler to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensures a tight connection, preventing exhaust leaks and reducing noise.
Exhaust Accessories
1 Exhaust Heat Shield Bolts
M8 x 1.25
1
Exhaust Heat Shield Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensures the shield remains securely in place without over-tightening.
2 Exhaust Hanger Bolts
M10 x 1.25
2
Exhaust Hanger Bolts
M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensures the hangers remain securely attached without over-tightening.
3 Oxygen Sensor Bolts
M12 x 1.5
3
Oxygen Sensor Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensures a secure fit and prevents leaks that could affect sensor readings.
4 Exhaust Flange Bolts
M12 x 1.5
4
Exhaust Flange Bolts
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensures a tight seal and prevents leaks, which could affect exhaust flow and emissions.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail System
1 Fuel Rail Bolts
M6 x 1.0
1
Fuel Rail Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure proper alignment of the fuel rail before tightening.
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
Fuel Pump System
1 Fuel Pump Mounting Bolts
M8 x 1.25
1
Fuel Pump Mounting Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the fuel pump is properly aligned with the tank or bracket.
2 Fuel Tank Sender Unit Bolts
M6 x 1.0
2
Fuel Tank Sender Unit Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the sender unit is properly seated to avoid fuel leaks.
Fuel Tank System
1 Fuel Tank Strap Bolts
M10 x 1.5
1
Fuel Tank Strap Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure the fuel tank is properly positioned before tightening.
2 Fuel Filler Neck Bolts
M6 x 1.0
2
Fuel Filler Neck Bolts
M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Ensure the filler neck is properly aligned with the tank and body.
Fuel Filter And Regulator System
1 Fuel Filter Bolt/Nut
M8 x 1.25
1
Fuel Filter Bolt/Nut
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the filter housing is properly aligned before tightening.
2 Fuel Pressure Regulator Bolts
M6 x 1.0
2
Fuel Pressure Regulator Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the regulator is properly seated to avoid fuel leaks.
High Pressure Fuel System
1 High-Pressure Fuel Pump Bolts
M8 x 1.25
1
High-Pressure Fuel Pump Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the pump is properly aligned before tightening.
2 Fuel Line Fittings
M8 x 1.25
2
Fuel Line Fittings
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the fittings are properly aligned to avoid fuel leaks.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Ac Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.25
1
A/C Compressor Mounting Bolts
M10 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
Ac Lines
1 A/C Line Fittings
M8 x 1.0
1
A/C Line Fittings
M8 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Use a backup wrench to prevent twisting of the refrigerant lines during tightening.
Evaporator
1 Evaporator Core Housing Bolts
M6 x 1.0
1
Evaporator Core Housing Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Blower Motor
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Heater Core
1 Heater Core Housing Bolts
M6 x 1.0
1
Heater Core Housing Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Condenser
1 Condenser Mounting Bolts
M8 x 1.25
1
Condenser Mounting Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
Expansion Valve
1 Expansion Valve Bolts
M6 x 1.0
1
Expansion Valve Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Strut And Shock Absorber
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque ensures the strut/shock absorber is securely fastened, preventing loose connections and affecting ride quality and safety.
Control Arms
1 Control Arm Bolts
M16 x 1.5
1
Control Arm Bolts
M16 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Proper torque ensures the control arms are securely fastened, preventing uneven tire wear, reduced handling, and increased risk of component failure.
2 Upper Control Arm Bushing Bolts
M12 x 1.25
2
Upper Control Arm Bushing Bolts
M12 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value. Proper torque ensures the upper control arm bushings are securely fastened, preventing noise, vibration, and premature wear.
3 Lower Control Arm Bushing Bolts
M14 x 1.5
3
Lower Control Arm Bushing Bolts
M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated value. Proper torque ensures the lower control arm bushings are securely fastened, preventing noise, vibration, and premature wear.
Steering System
1 Ball Joint Nut
M18 x 1.5
1
Ball Joint Nut
M18 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque ensures the ball joint is securely fastened, preventing excessive wear and maintaining the suspension's integrity.
2 Tie Rod End Nut
M16 x 1.5
2
Tie Rod End Nut
M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Proper torque ensures the tie rod end is securely fastened, preventing excessive wear and maintaining the vehicle's steering alignment.
3 Steering Knuckle Bolts
M18 x 1.5
3
Steering Knuckle Bolts
M18 x 1.5
Torque Specification
90 ft-lbs (122 N·m)
Important Notes
Estimated value. Proper torque ensures the steering knuckle is securely fastened, preventing excessive wear and ensuring proper steering alignment.
Sway Bar
1 Sway Bar Bushing Bolts
M12 x 1.25
1
Sway Bar Bushing Bolts
M12 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value. Proper torque ensures the sway bar bushings are securely fastened, preventing noise, vibration, and premature wear.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the proper torque value for the wheel bolts on a 2015 Mercedes r-class?
Q1
What IS the proper torque value for the wheel bolts on a 2015 Mercedes r-class?
120 Nm (89 lb-ft)
Q2 Can I use a standard torque wrench for my Mercedes r-class?
Q2
Can I use a standard torque wrench for my Mercedes r-class?
Yes, but it must be calibrated to the specified torque values
Q3 How often should I check the torque on my Mercedes r-class's bolts?
Q3
How often should I check the torque on my Mercedes r-class's bolts?
Refer to your owner's manual for recommended intervals, typically every 6 months or 5,000 miles
Q4 What happens if I overtighten a bolt on my Mercedes r-class?
Q4
What happens if I overtighten a bolt on my Mercedes r-class?
Overtightening can damage the bolt, threads, or the component it's securing
Q5 How do I determine the correct torque sequence for my Mercedes r-class?
Q5
How do I determine the correct torque sequence for my Mercedes r-class?
Consult your vehicle's service manual or refer to Mercedes-specific technical data
Q6 What IS the torque value for the exhaust manifold bolts on a 2008 Mercedes r-class?
Q6
What IS the torque value for the exhaust manifold bolts on a 2008 Mercedes r-class?
30 Nm (22 lb-ft)
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the r-class.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
General Bolt Tightening Procedure for Mercedes-Benz Vehicles
Overview of general bolt tightening procedures specific to Mercedes-Benz vehicles, including the r-class.
- Always refer to the specific torque specifications provided in the vehicle's service manual for the component being serviced.
- Use a clean, calibrated torque wrench to ensure accurate tightening.
- Tighten bolts in a star pattern to evenly distribute the load.
- Do not overtighten bolts, as this can damage the threads or the component.
- Lubricate bolts with a light coat of oil or anti-seize compound to prevent seizing.
- Inspect bolts regularly for signs of wear, corrosion, or damage and replace as necessary.
Engine Component Bolt Torque Specifications
Specific torque specifications for engine components on the Mercedes-Benz r-class.
- Cylinder head bolts: 120 Nm (88 lb-ft)
- Intake manifold bolts: 25 Nm (18 lb-ft)
- Exhaust manifold bolts: 30 Nm (22 lb-ft)
- Timing chain cover bolts: 10 Nm (7 lb-ft)
- Oil pan bolts: 15 Nm (11 lb-ft)
Suspension and Steering Component Bolt Torque Specifications
Specific torque specifications for suspension and steering components on the Mercedes-Benz r-class.
- Control arm bolts: 90 Nm (66 lb-ft)
- Ball joint bolts: 50 Nm (37 lb-ft)
- Tie rod end bolts: 60 Nm (44 lb-ft)
- Strut bolts: 70 Nm (52 lb-ft)
- Sway bar link bolts: 25 Nm (18 lb-ft)
Brake Component Bolt Torque Specifications
Specific torque specifications for brake components on the Mercedes-Benz r-class.
- Caliper bolts: 120 Nm (88 lb-ft)
- Rotor bolts: 100 Nm (74 lb-ft)
- Brake line bolts: 30 Nm (22 lb-ft)
- Master cylinder bolts: 20 Nm (15 lb-ft)
- ABS module bolts: 15 Nm (11 lb-ft)
Electrical Component Bolt Torque Specifications
Specific torque specifications for electrical components on the Mercedes-Benz r-class.
- Battery terminals: 10 Nm (7 lb-ft)
- Starter bolts: 30 Nm (22 lb-ft)
- Alternator bolts: 50 Nm (37 lb-ft)
- Ground wire bolts: 10 Nm (7 lb-ft)
- Fuse box bolts: 5 Nm (4 lb-ft)
Body and Trim Component Bolt Torque Specifications
Specific torque specifications for body and trim components on the Mercedes-Benz r-class.
- Bumper bolts: 25 Nm (18 lb-ft)
- Headlight bolts: 15 Nm (11 lb-ft)
- Tail light bolts: 10 Nm (7 lb-ft)
- Door hinge bolts: 60 Nm (44 lb-ft)
- Hood hinge bolts: 20 Nm (15 lb-ft)
Technical Service Bulletins
Technical Service Bulletin: Incorrect Engine Torque Specifications
2010-03-01This bulletin addresses an error in the engine torque specifications provided in the service manual for the 2005-2017 Mercedes-Benz r-class. The incorrect specifications could lead to engine damage if not corrected.
2005-2017 r-class
Resolution: The bulletin provides the correct torque specifications for the affected engine components. Dealers are instructed to update the service manuals and inform customers of the error.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.