Mercedes-Benz Vehicle Models Mercedes GLA 2020-present Torque Specifications
Mercedes-Benz Vehicle Models Mercedes GLA 2020-present

Mercedes-Benz Vehicle Models Mercedes GLA 2020-present Torque Specifications

Complete Mercedes-Benz Vehicle Models Mercedes GLA 2020-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

1.3l I4 Engine

Torque specifications for 1.3L-I4 Engine

Cylinder Head and Valvetrain

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
3

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)

Engine Block and Bearings

1

Main Bearing Bolts

M14 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2

Connecting Rod Nuts

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)

Timing System

1

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)

Engine Accessories

1

Water Pump Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2

Thermostat Housing Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
3

Oil Filter Housing Bolt

M12 x 1.5
Torque Specification
N/A
Important Notes
Hand tight only.

Engine Mounting and Exhaust

1

Engine Mounting Bolts

M14 x 1.5
Torque Specification
1. 30 ft-lbs (40 N·m) 2. 40 ft-lbs (54 N·m)
Important Notes
Estimated values. Consult manufacturer's recommendations for specific torque values.
2

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)

2.0l I4 Engine

Torque specifications for 2.0L-I4 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 18 ft-lbs (24 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure proper alignment.
2

Connecting Rod Nuts

M8 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the connecting rod caps are properly aligned before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Camshaft Sprocket Bolt

M12 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Ensure the sprocket is properly aligned with the timing marks.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Follow the manufacturer's specified torque sequence to ensure proper sealing.
2

Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Drain Plug Bolt

M14 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Replace the crush washer to ensure a proper seal.

7g Dct Transmission

Torque specifications for 7g Dct Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)

Transmission Fluid System

1

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
2

Transmission Fluid Drain/Fill Plug

M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

Transmission Case and Cover

1

7G-DCT Transmission Case Bolts

M12 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

Transmission Valve Body

1

7G-DCT Transmission Valve Body Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

Transmission Solenoid Pack

1

7G-DCT Transmission Solenoid Pack Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

Transmission Clutch Pack

1

7G-DCT Transmission Clutch Pack Bolts

M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on industry standards for similar transmission designs.

8g Dct Transmission

Torque specifications for 8g Dct Transmission

Transmission Mounting and Case

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
2

8G-DCT Transmission Case Bolts

M14 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Estimated value based on industry standards for similar transmission cases.

Transmission Oil Pan and Fluid System

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
2

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
3

Transmission Fluid Drain/Fill Plug

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

Transmission Clutch and Gear System

1

8G-DCT Transmission Clutch Pack Bolts

M12 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on industry standards for similar clutch pack applications.
2

8G-DCT Transmission Gear Set Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on industry standards for similar gear set applications.

Transmission Solenoid System

1

8G-DCT Transmission Solenoid Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards for similar solenoid applications.

Body

Torque specifications for Body

Suspension and Steering

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
2

Control Arm Bolts

M16 x 1.5
Torque Specification
129 ft-lbs (175 N·m)
3

Ball Joint Nut

M12 x 1.25
Torque Specification
48 ft-lbs (65 N·m)
4

Tie Rod End Nut

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
5

Sway Bar Link Nut

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
6

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
96 ft-lbs (130 N·m)

Body and Frame

1

Body Mount Bolts

M12 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Estimated value based on general industry standards.
2

Door Hinge Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.
3

Hood Hinge Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.
4

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.
5

Bumper Mounting Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on general industry standards.

Brakes

Torque specifications for Brakes

Brake Caliper

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
79 ft-lbs (107 N·m)
Important Notes
Ensure proper alignment of the caliper before tightening.
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
129 ft-lbs (175 N·m)
Important Notes
Ensure the bracket is properly seated before tightening.

Brake Rotor

1

Brake Disc/Drum Retaining Bolts

M8 x 1.25
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Ensure the rotor is properly seated on the hub before tightening.

Brake Hose

1

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the sealing washers are properly seated before tightening.

Brake Bleeder

1

Brake Bleeder Screw

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Over-tightening can damage the screw or caliper.

Brake Master Cylinder

1

Brake Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the master cylinder is properly seated before tightening.

Brake Pedal

1

Brake Pedal Assembly Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the pedal assembly is properly aligned before tightening.

Abs Sensor

1

ABS Sensor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the sensor is properly seated before tightening.

Wheel Lug Nuts

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
96 ft-lbs (130 N·m)
Important Notes
Use a star pattern to tighten the lug nuts evenly.

Drivetrain

Torque specifications for Drivetrain

Engine and Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Proper torque is necessary to prevent transmission movement and damage.

Transmission and Drive Axle

1

Flywheel Bolts

M12 x 1.25
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
Proper torque is essential to prevent damage to the flywheel, crankshaft, and transmission.
2

Drive Axle/Half Shaft Bolts

M16 x 1.5
Torque Specification
147 ft-lbs (200 N·m)
Important Notes
Proper torque is essential to prevent damage to the axle shafts and transmission.

Transmission Oil Pan and Cooler

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Proper torque is essential to prevent oil leaks and damage to the transmission.
2

Transmission Cooler Line Fittings

M12 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque is necessary to prevent leaks and damage to the transmission and cooling system.

Differential and Transfer Case

1

Differential Drain/Fill Plug

M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Proper torque is necessary to prevent leaks and damage to the differential.
2

Transfer Case Drain/Fill Plug

M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Proper torque is necessary to prevent leaks and damage to the transfer case.

CV Joint and Axle Shaft

1

CV Joint/Axle Nut

M18 x 1.5
Torque Specification
180 ft-lbs (245 N·m)
Important Notes
Proper torque is necessary to prevent damage to the CV joint and axle shaft.

Propeller/Drive Shaft

1

Propeller/Drive Shaft Bolts

M12 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Proper torque is essential to prevent damage to the drive shaft and transmission.

Engine Sensors

1

Crankshaft Position Sensor Bolt

M10 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value. Proper torque is necessary to prevent damage to the sensor and engine.
2

Camshaft Position Sensor Bolt

M10 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value. Proper torque is necessary to prevent damage to the sensor and engine.

Electrical

Torque specifications for Electrical

Alternator And Starter Motor

1

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2

Starter Motor Mounting Bolts

M12 x 1.75
Torque Specification
44 ft-lbs (60 N·m)

Battery And Terminals

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)

Ignition Coil And Fuel Pump

1

Ignition Coil Mounting Bolts

M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value based on general industry standards.
2

Fuel Pump Electrical Connector Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on general industry standards.

A/C Compressor And Power Steering Pump

1

A/C Compressor Electrical Connector Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on general industry standards.
2

Power Steering Pump Electrical Connector Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on general industry standards.

Emissions Sensors

Torque specifications for Emissions_sensors

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Engine Block Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper sealing to prevent exhaust leaks.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper sealing to prevent exhaust leaks.

Exhaust Pipe Connections

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper sealing to prevent exhaust leaks.
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper sealing to prevent exhaust leaks.

Emissions Sensors

1

Oxygen Sensor (O2 Sensor) Mounting Nut

M12 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper sealing to prevent exhaust leaks.
2

NOx Sensor Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure proper sealing to prevent exhaust leaks.
3

Exhaust Gas Temperature Sensor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure proper sealing to prevent exhaust leaks.

Diesel Particulate Filter

1

DPF Mounting Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper sealing to prevent exhaust leaks.

Egr Valve

1

EGR Valve Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure proper sealing to prevent exhaust leaks.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold and Headers

1

Exhaust Manifold/Headers to Engine Block Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)

Exhaust Pipes and Components

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
3

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)

Exhaust System Accessories

1

Oxygen Sensor Bolts

M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on general industry standards.
2

Exhaust System Mounting Bolts

M12 x 1.75
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on general industry standards.
3

Heat Shield Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.
4

Exhaust System Clamp Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on general industry standards.

Fuel

Torque specifications for Fuel

Fuel Rail System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure injectors are properly seated before tightening.

Fuel Pump System

1

Fuel Pump Mounting Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the fuel pump is properly aligned before tightening.
2

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar components. Tighten in a crisscross pattern.

Fuel Tank System

1

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the fuel tank is properly positioned before tightening.
2

Fuel Filler Neck Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Ensure the filler neck is properly aligned with the fuel tank.
3

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.

Fuel Filter And Lines

1

Fuel Filter Bolt/Nut

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the fuel filter is properly aligned before tightening.
2

Fuel Line Fittings

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar components.

Evaporative Emissions System

1

Fuel Evaporative Canister Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components.

Hvac

Torque specifications for Hvac

A/C Compressor

1

A/C Compressor Mounting Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Proper torque is essential to prevent damage to the compressor and surrounding components.

A/C Condenser

1

A/C Condenser Mounting Bolts

M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque is essential to prevent damage to the condenser and surrounding components. Estimated value based on industry standards.

A/C Evaporator

1

A/C Evaporator Mounting Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque is necessary to prevent damage to the evaporator and surrounding components. Estimated value based on industry standards.

A/C Refrigerant Lines

1

A/C Line Fittings

M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Proper torque is necessary to prevent leaks and ensure a secure connection.
2

A/C Refrigerant Line Bracket Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque is necessary to prevent damage to the lines and surrounding components. Estimated value based on industry standards.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
2

Control Arm Bolts

M16 x 1.5
Torque Specification
129 ft-lbs (175 N·m)
3

Upper Control Arm Bolts

M14 x 1.5
Torque Specification
80 ft-lbs (110 N·m)
Important Notes
Estimated value based on industry standards.
4

Lower Control Arm Bolts

M16 x 1.5
Torque Specification
100 ft-lbs (135 N·m)
Important Notes
Estimated value based on industry standards.

Steering System

1

Ball Joint Nut

M12 x 1.5
Torque Specification
48 ft-lbs (65 N·m)
2

Tie Rod End Nut

M12 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
3

Steering Gear Mounting Bolts

M14 x 1.5
Torque Specification
80 ft-lbs (110 N·m)
Important Notes
Estimated value based on industry standards.

Stabilizer Bar

1

Sway Bar Link Nut

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
2

Stabilizer Bar Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (55 N·m)
Important Notes
Estimated value based on industry standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the specified torque value for the cylinder head bolts on a 2020-Present Mercedes gla?

Tighten the cylinder head bolts in three stages: 40 Nm + 90° + 90°.

Q2

What tools are recommended for achieving accurate torque measurements on a Mercedes gla?

Use a calibrated torque wrench that meets or exceeds industry standards. Ensure the wrench IS within its specified torque range.

Q3

IS it necessary to re-torque bolts after a certain period of time or mileage?

Refer to the Mercedes service schedule for specific re-torque intervals. Generally, critical components such as cylinder head bolts may require re-torquing after a break-in period or major maintenance.

Q4

What are the consequences of over-torquing or under-torquing bolts?

Over-torquing can damage threads, weaken bolts, and lead to component failure. Under-torquing can result in loose connections, leaks, and compromised structural integrity.

Q5

Can I use a torque multiplier to increase the torque applied?

Yes, torque multipliers can be used to amplify the torque output of a torque wrench. However, ensure the multiplier IS properly calibrated and compatible with the wrench and bolt.

Q6

What IS the recommended torque sequence for tightening multiple bolts on a component?

Follow the manufacturer's specified torque sequence to ensure even distribution of stress and prevent distortion. Tighten bolts in a star pattern or from the center outwards.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for applying precise torque to fasteners, ensuring proper assembly and maintenance. Suitable for many applications on the 2020-Present Mercedes gla.

  • Accurate digital readings
  • Audible signal when target torque IS achieved
  • Selectable units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Mount Replacement

Step-by-step guide for replacing engine mounts on the 2020-Present Mercedes gla, including torque specifications.

  • Safety precautions and preparation
  • Removal of existing engine mounts
  • Installation of new engine mounts with specified torque values
  • Reassembly and final checks
View full procedure

Brake Pad Replacement

Detailed instructions for changing brake pads on the 2020-Present Mercedes gla, with specific torque values for caliper bolts.

  • Wheel removal and caliper disassembly
  • Removal of worn brake pads
  • Installation of new brake pads and torque application
  • Caliper reassembly and wheel installation
View full procedure
Technical Service Bulletins

TSB: Suspension Bolt Torque Correction

2022-03-15

Technical bulletin issued by Mercedes addressing incorrect torque values for suspension bolts on certain 2020-Present gla models.

2020-2022 gla 250

Resolution: Provides revised torque specifications and instructions for correction

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Mercedes-Benz Specs. All rights reserved.

Privacy Policy Terms of Service