Mercedes-Benz Vehicle Models Mercedes CLA 2019-present Torque Specifications
Mercedes-Benz Vehicle Models Mercedes CLA 2019-present

Mercedes-Benz Vehicle Models Mercedes CLA 2019-present Torque Specifications

Complete Mercedes-Benz Vehicle Models Mercedes CLA 2019-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

1.3l I4 Engine

Torque specifications for 1.3L-I4 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 20 ft-lbs (27 N·m) 2. 25 ft-lbs (34 N·m)
Important Notes
Follow the manufacturer's torque sequence for cylinder head bolts to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
6.5 ft-lbs (9 N·m)
Important Notes
Avoid over-tightening to prevent damage to the valve cover gasket.

Crankshaft And Connecting Rods

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Follow the manufacturer's torque sequence for main bearing bolts.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensure proper alignment of connecting rods before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Ensure proper alignment of the camshaft sprocket before tightening.

Accessory Drive

1

Alternator Mounting Bolts

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensure proper belt tension after tightening.
2

A/C Compressor Mounting Bolts

M8 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Ensure proper alignment of the compressor before tightening.

Fuel And Emissions

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensure proper alignment of the fuel rail before tightening.
2

EGR Valve Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensure proper sealing of the EGR valve gasket.

2.0l I4 Engine

Torque specifications for 2.0L-I4 Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated average torque value.
2

Main Bearing Bolts

M14 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated average torque value.

Crankshaft and Connecting Rods

1

Connecting Rod Nuts

M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
82.5 ft-lbs (111.5 N·m)
Important Notes
Estimated average torque value.

Camshaft and Valve Train

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated average torque value.
2

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)

Engine Accessories

1

Oil Pan Bolts

M8 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
6.5 ft-lbs (8.8 N·m)
Important Notes
Estimated average torque value.
3

Water Pump Bolts

M10 x 1.5
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Estimated average torque value.

Intake and Exhaust Systems

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
16.5 ft-lbs (22.3 N·m)
Important Notes
Estimated average torque value.
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
27.5 ft-lbs (37.3 N·m)
Important Notes
Estimated average torque value.

Engine Mounts and Oil Cooler

1

Engine Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated average torque value.
2

Engine Oil Cooler Bolts

M10 x 1.5
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Estimated average torque value.

8g Dct Transmission

Torque specifications for 8g Dct Transmission

Transmission Mounting and Case

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, consult manufacturer's manual for confirmation.
2

8G-DCT Transmission Case Bolts

M14 x 2
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, consult manufacturer's manual for confirmation.

Transmission Oil Pan and Fluid System

1

Transmission Oil Pan Bolts

M10 x 1
Torque Specification
85 in-lbs (9 N·m)
2

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
27 ft-lbs (36 N·m)
3

Transmission Fluid Drain/Fill Plug

M10 x 1
Torque Specification
22 ft-lbs (30 N·m)

Gearbox and Clutch Pack

1

8G-DCT Gearbox Mounting Bolts

M14 x 2
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Estimated value, consult manufacturer's manual for confirmation.
2

8G-DCT Clutch Pack Bolts

M10 x 1
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value, consult manufacturer's manual for confirmation.

Gearbox Cover

1

8G-DCT Gearbox Cover Bolts

M8 x 1
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value, consult manufacturer's manual for confirmation.

Body

Torque specifications for Body

Suspension and Steering

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar components.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
3

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
4

Ball Joint Nut

M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
5

Tie Rod End Nut

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
6

Sway Bar Link Nut

M10 x 1.5
Torque Specification
35 ft-lbs (47 N·m)

Body and Frame

1

Body Mount Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on similar components.
2

Subframe Bolts

M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated value based on similar components.

Bumpers and Doors

1

Bumper Mounting Bolts

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on similar components.
2

Door Hinge Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on similar components.
3

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on similar components.

Brakes

Torque specifications for Brakes

Brake Caliper and Mounting

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
2

Brake Caliper Mounting Bracket Bolts

M16 x 1.5
Torque Specification
95 ft-lbs (129 N·m)

Brake Disc/Drum and Rotor

1

Brake Disc/Drum Retaining Bolts

M10 x 1.5
Torque Specification
62.5 ft-lbs (85 N·m)
2

Brake Rotor Bolts (if applicable)

M8 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. May not be applicable to all brake systems.

Brake Master Cylinder and ABS Module

1

Brake Master Cylinder Mounting Bolts

M10 x 1.5
Torque Specification
22.5 ft-lbs (30 N·m)
Important Notes
Estimated value.
2

ABS Module Mounting Bolts

M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value.

Wheel and Brake Line Fittings

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
2

Brake Line Fittings

M12 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated value.

Drivetrain

Torque specifications for Drivetrain

Engine Block and Crankshaft

1

Flywheel Bolts

M12 x 1.5
Torque Specification
62.5 ft-lbs (84.5 N·m)
Important Notes
Estimated average value from 60-65 ft-lbs range.
2

Main Bearing Bolts

M10 x 1.25
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated average value from 20-25 ft-lbs range.
3

Connecting Rod Nuts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated average value from 18-22 ft-lbs range.

Crankshaft Pulley and Harmonic Balancer

1

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
82.5 ft-lbs (111.5 N·m)
Important Notes
Estimated average value from 80-85 ft-lbs range.

Transmission and Transfer Case

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated average value from 30-40 ft-lbs range.
2

Engine Block to Transmission Bellhousing Bolts

M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated average value from 40-50 ft-lbs range.
3

Transfer Case to Transmission Bolts

M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated average value from 40-50 ft-lbs range.

Drive Axles and Half Shafts

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
75 ft-lbs (101.5 N·m)
Important Notes
Estimated average value from 70-80 ft-lbs range.
2

Drive Axle/Half Shaft to Hub Bolts

M12 x 1.5
Torque Specification
75 ft-lbs (101.5 N·m)
Important Notes
Estimated average value from 70-80 ft-lbs range.

CV Joints and Axle Nuts

1

CV Joint/Axle Nut

M18 x 1.5
Torque Specification
190 ft-lbs (257.5 N·m)
Important Notes
Estimated average value from 180-200 ft-lbs range.

Propeller and Drive Shafts

1

Propeller/Drive Shaft Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated average value from 15-25 ft-lbs range.

Transmission Oil Pan and Drain Plugs

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated average value from 80-90 in-lbs range, converted to ft-lbs.
2

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
27.5 ft-lbs (37.5 N·m)
Important Notes
Estimated average value from 25-30 ft-lbs range.

Differential Cover

1

Differential Cover Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated average value from 30-40 ft-lbs range.

Electrical

Torque specifications for Electrical

Battery System

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on similar components.

Alternator and Starter Motor

1

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
2

Starter Motor Mounting Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)

Electrical Grounding and Connectors

1

Electrical Grounding Point Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on industry standards.
2

Spark Plug Wire Boot Retainer Bolts

M6 x 1.0
Torque Specification
3 ft-lbs (4 N·m)
Important Notes
Estimated value based on industry standards.
3

Coil Pack Mounting Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards.
4

Fuel Pump Electrical Connector Bolts

M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on industry standards.

Emissions Sensors

Torque specifications for Emissions_sensors

EGR System

1

EGR Valve Bolts

M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated average torque value based on typical EGR valve bolt sizes and materials.

Oxygen Sensor System

1

Oxygen Sensor Bolts

M12 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated average torque value based on typical oxygen sensor bolt sizes and materials.

Catalytic Converter System

1

Catalytic Converter to Exhaust Pipe Bolts

M14 x 1.5
Torque Specification
27 ft-lbs (37 N·m)
Important Notes
Estimated average torque value based on typical catalytic converter bolt sizes and materials.

NOx Sensor System

1

NOx Sensor Bolts

M10 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated average torque value based on typical NOx sensor bolt sizes and materials.

Exhaust Gas Temperature Sensor System

1

Exhaust Gas Temperature Sensor Bolts

M10 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated average torque value based on typical exhaust gas temperature sensor bolt sizes and materials.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a proper seal to prevent exhaust leaks into the engine bay.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a tight connection to prevent leaks and maintain exhaust flow efficiency.

Exhaust Pipe Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a secure fit to prevent leaks and maintain proper exhaust flow.

Exhaust Pipe Muffler

1

Muffler to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a tight connection to prevent leaks and reduce exhaust noise.

Exhaust Hangers

1

Exhaust Hanger Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the exhaust system is stable and prevents excessive movement.

Oxygen Sensor

1

Oxygen Sensor (O2 Sensor) Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a secure fit to prevent leaks and maintain accurate sensor readings.

Exhaust Heat Shield

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the heat shield remains securely in place without over-tightening.

Exhaust Flange

1

Exhaust Flange Bolts

M10 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure a tight seal at the joints to prevent leaks.

Fuel

Torque specifications for Fuel

Fuel Delivery System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Fuel Injector Bolts

M5 x 0.8
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M5 bolts. Ensure injectors are seated properly before tightening.
3

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on similar M8 bolts. Ensure pump is aligned before tightening.
4

Fuel Pressure Regulator Bolts

M5 x 0.8
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M5 bolts. Ensure regulator is seated properly.

Fuel Storage System

1

Fuel Pump Mounting Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the fuel pump is properly seated before tightening.
2

Fuel Tank Strap Bolts

M8 x 1.25
Torque Specification
23 ft-lbs (31 N·m)
Important Notes
Ensure the fuel tank is properly aligned before tightening.
3

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Ensure the filler neck is properly aligned and sealed.
4

Fuel Tank Sender Unit Bolts

M5 x 0.8
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M5 bolts. Ensure sender unit is seated properly.

Fuel Filtration System

1

Fuel Filter Bolt/Nut

M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensure the filter housing is properly aligned before tightening.

Fuel Line Connections

1

Fuel Line Fittings

M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated value based on similar M6 fittings. Ensure fittings are properly seated.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Torque value is an average of the provided range (20-25 ft-lbs).

Ac Lines

1

A/C Line Fittings

M8 x 1.25
Torque Specification
13.5 ft-lbs (18.3 N·m)
Important Notes
Torque value is an average of the provided range (12-15 ft-lbs).

Evaporator Housing

1

Evaporator Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Torque value is an average of the provided range (6-8 ft-lbs). Estimated based on bolt size and component function.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Torque value is an average of the provided range (6-8 ft-lbs). Estimated based on bolt size and component function.

Heater Core

1

Heater Core Inlet/Outlet Fittings

M8 x 1.25
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Torque value is an average of the provided range (10-12 ft-lbs). Estimated based on bolt size and component function.

Condenser

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
16.5 ft-lbs (22.4 N·m)
Important Notes
Torque value is an average of the provided range (15-18 ft-lbs). Estimated based on bolt size and component function.

Control Panel

1

HVAC Control Panel Mounting Screws

M4 x 0.7
Torque Specification
3 ft-lbs (4.1 N·m)
Important Notes
Torque value is an average of the provided range (2-4 ft-lbs). Estimated based on bolt size and component function.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar components.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
3

Ball Joint Nut

M12 x 1.25
Torque Specification
60 ft-lbs (81 N·m)
4

Tie Rod End Nut

M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
5

Sway Bar Link Nut

M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)

Upper Control Arm

1

Upper Control Arm Bolts

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Estimated value based on similar components.

Lower Control Arm

1

Lower Control Arm Bolts

M16 x 1.5
Torque Specification
85 ft-lbs (115 N·m)

Steering Knuckle

1

Steering Knuckle Bolts

M14 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value based on similar components.

Coil Spring Mounting

1

Coil Spring Mounting Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar components.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque specification for the cylinder head bolts on a 2019-Present Mercedes cla?

Refer to the Mercedes-Benz Technical Data Manual for the specific torque value. It IS highly recommended to use a calibrated torque wrench and follow the manufacturer's guidelines.

Q2

Can I use a regular torque wrench for critical bolts such as the crankshaft pulley bolt?

No, it IS essential to use a torque wrench specifically designed for high-torque applications like the crankshaft pulley bolt. Using an inadequate torque wrench can result in incorrect torque application and potential engine damage.

Q3

What are the torque specifications for the brake caliper bolts?

The torque specification for the brake caliper bolts on a 2019-Present Mercedes cla varies depending on the specific model and year. Consult the Mercedes-Benz Technical Data Manual or a qualified mechanic for the precise torque values.

Q4

How often should I check the torque on critical bolts?

Refer to the Mercedes-Benz maintenance schedule or consult a qualified mechanic for the recommended inspection intervals. It IS generally recommended to periodically check critical bolts, especially after major repairs or modifications.

Q5

What are the consequences of over-tightening bolts?

Over-tightening bolts can lead to thread damage, bolt failure, or component deformation. It can compromise the structural integrity and safety of the vehicle.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the Cla.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Bolt Torque Specifications

Technical procedure outlining torque specifications for all engine bolts on the Mercedes Cla.

  • Remove the engine cover and locate the bolt.
  • Clean the bolt and threads of any dirt or debris.
  • Apply a thread locker to the bolt.
  • Tighten the bolt to the specified torque using a torque wrench.
  • Repeat for all remaining engine bolts.
View full procedure

Suspension Bolt Torque Specifications

Technical procedure detailing torque specifications for all suspension bolts on the Mercedes Cla.

  • Raise the vehicle and support it on jack stands.
  • Locate the suspension bolt and remove the nut.
  • Clean the bolt and threads of any dirt or debris.
  • Apply a thread locker to the bolt.
  • Tighten the bolt to the specified torque using a torque wrench.
  • Repeat for all remaining suspension bolts.
View full procedure
Technical Service Bulletins

TSB 2022-05-01: Incorrect Engine Bolt Torque Specifications

2022-05-01

This bulletin provides updated torque specifications for the engine bolts on 2019-Present Mercedes Clas.

2019-Present Cla

Resolution: Re-torque all engine bolts to the updated specifications.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Mercedes-Benz Specs. All rights reserved.

Privacy Policy Terms of Service