Mercedes-Benz Vehicle Models Mercedes C-Class 2021-present Torque Specifications
Mercedes-Benz Vehicle Models Mercedes C-Class 2021-present

Mercedes-Benz Vehicle Models Mercedes C-Class 2021-present Torque Specifications

Complete Mercedes-Benz Vehicle Models Mercedes C-Class 2021-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

2.0l I4 Engine

Torque specifications for 2.0L-I4 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 18 ft-lbs (25 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence. Final step involves a 90-degree angle tightening.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M12 x 1.5
Torque Specification
56 ft-lbs (76 N·m)
Important Notes
Ensure proper alignment of the main bearings before tightening.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure the connecting rod bearings are properly seated before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper tensioning of the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the camshaft sprocket is properly aligned with the timing marks.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Ensure the intake manifold gasket is properly seated before tightening.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Accessories

1

Alternator Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the alternator is properly aligned with the drive belt.
2

Serpentine Belt Tensioner Bolt

M10 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure proper tension on the serpentine belt before tightening.

3.0l I6 Engine

Torque specifications for 3.0L-I6 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.5
Torque Specification
1. 18 ft-lbs (25 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to avoid warping the cylinder head.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Main Bearings

1

Main Bearing Bolts

M12 x 1.75
Torque Specification
56 ft-lbs (76 N·m)
Important Notes
Ensure the crankshaft is properly seated in the bearings before tightening.
2

Flywheel Bolts

M10 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
Use thread locker on the flywheel bolts to prevent loosening.

Timing System

1

Timing Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Ensure the intake manifold gasket is properly seated before tightening.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Fuel System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the fuel rail is properly aligned before tightening.
2

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the fuel pump is properly aligned before tightening.

9g Tronic Transmission

Torque specifications for 9g Tronic Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)

Transmission Oil System

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
2

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
3

Transmission Fluid Drain/Fill Plug

M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)

9G Tronic Transmission Case

1

9G-Tronic Transmission Bellhousing Bolts

M16 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Estimated value based on industry standards.
2

9G-Tronic Transmission Valve Body Bolts

M12 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on industry standards.
3

9G-Tronic Transmission Solenoid Pack Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards.
4

9G-Tronic Transmission Filter Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards.

Body

Torque specifications for Body

Brake System

1

Brake Caliper Bolts

M14 x 1.5
Torque Specification
77 ft-lbs (104 N·m)
Important Notes
Proper torque is essential to ensure safe braking performance and prevent damage to surrounding components.
2

Brake Caliper Mounting Bracket Bolts

M16 x 1.5
Torque Specification
129 ft-lbs (175 N·m)
Important Notes
Proper torque is necessary to maintain the structural integrity of the bracket and ensure safe braking performance.
3

Brake Disc/Drum Retaining Bolts

M12 x 1.25
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Proper torque is essential to prevent the brake discs or drums from coming loose and causing a loss of braking performance or damage to surrounding components.

Suspension System

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Proper torque is necessary to maintain the structural integrity of the suspension and ensure safe handling and stability.
2

Control Arm Bolts

M16 x 1.5
Torque Specification
111 ft-lbs (150 N·m)
Important Notes
Proper torque is essential to maintain the alignment and stability of the vehicle's suspension.
3

Ball Joint Nut

M14 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Proper torque is necessary to maintain the structural integrity of the ball joint and ensure safe handling and stability.
4

Tie Rod End Nut

M12 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Proper torque is essential to maintain the alignment and stability of the vehicle's steering.

Wheel and Hub System

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
96 ft-lbs (130 N·m)
Important Notes
Proper torque is essential to prevent the wheels from coming loose and causing a loss of control or accidents.

Frame and Body System

1

Front Subframe Bolts

M16 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value. Proper torque is critical for maintaining the structural integrity of the vehicle's front end.
2

Rear Subframe Bolts

M16 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value. Proper torque is critical for maintaining the structural integrity of the vehicle's rear end.
3

Body Mount Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque is critical for maintaining the structural integrity of the vehicle's body.
4

Suspension Bushing Bolts

M12 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Proper torque is critical for maintaining the alignment and stability of the vehicle's suspension.

Brakes

Torque specifications for Brakes

Brake Caliper System

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
77 ft-lbs (104 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
129 ft-lbs (175 N·m)
Important Notes
These bolts are critical for maintaining the structural integrity of the braking system.

Brake Rotor Drum System

1

Brake Disc/Drum Retaining Bolts

M10 x 1.25
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Ensure the rotor or drum is properly seated on the hub before tightening.

Wheel And Hub System

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
96 ft-lbs (130 N·m)
Important Notes
Tighten lug nuts in a star pattern to ensure even pressure distribution.

Hydraulic Brake System

1

Brake Hose Banjo Bolt

M10 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the sealing washers are in good condition and properly seated.
2

Brake Master Cylinder Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the master cylinder is properly aligned before tightening.

Brake Pedal System

1

Brake Pedal Assembly Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the pedal assembly is properly aligned before tightening.

Abs System

1

ABS Sensor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the sensor is properly seated and aligned before tightening.

Drivetrain

Torque specifications for Drivetrain

Engine and Transmission Mounting

1

Engine Block to Transmission Bellhousing Bolts

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on general industry standards.
2

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)

Transmission and Drive Axle Components

1

Transmission Oil Pan Bolts

M10 x 1.5
Torque Specification
6 ft-lbs (8 N·m)
2

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
3

Drive Axle/Half Shaft Nut (at the wheel hub)

M16 x 1.5
Torque Specification
96 ft-lbs (130 N·m)
Important Notes
Estimated value based on general industry standards.

Differential and Propeller Shaft Components

1

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
2

Differential Cover Bolts

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.
3

Propeller/Drive Shaft Bolts

M14 x 1.5
Torque Specification
44 ft-lbs (60 N·m)

Engine Internal Components

1

Flywheel Bolts

M12 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
2

Main Bearing Bolts

M14 x 1.5
Torque Specification
56 ft-lbs (76 N·m)
3

Connecting Rod Nuts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
4

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
77 ft-lbs (104 N·m)

CV Joint and Axle Components

1

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
148 ft-lbs (200 N·m)

Electrical

Torque specifications for Electrical

Alternator and Starter Motor Mounting

1

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2

Starter Motor Mounting Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)

Battery Terminal and Electrical Connectors

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
2

Ignition Coil Mounting Bolts

M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 12 ft-lbs (16 N·m)
Important Notes
Estimated torque values based on general industry guidelines.
3

Fuel Pump Electrical Connector Bolts

M6 x 1.0
Torque Specification
1. 5 ft-lbs (7 N·m) 2. 7 ft-lbs (10 N·m)
Important Notes
Estimated torque values based on general industry guidelines.
4

A/C Compressor Electrical Connector Bolts

M6 x 1.0
Torque Specification
1. 5 ft-lbs (7 N·m) 2. 7 ft-lbs (10 N·m)
Important Notes
Estimated torque values based on general industry guidelines.
5

Power Steering Pump Electrical Connector Bolts

M6 x 1.0
Torque Specification
1. 5 ft-lbs (7 N·m) 2. 7 ft-lbs (10 N·m)
Important Notes
Estimated torque values based on general industry guidelines.

Emissions Sensors

Torque specifications for Emissions_sensors

Exhaust Manifold And Headers

1

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.

Exhaust Pipe And Catalytic Converter

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Emissions Sensors

1

Oxygen Sensor (O2 Sensor) Mounting Nut

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure sensor is properly aligned before tightening.
2

NOx Sensor Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure sensor is properly aligned before tightening.
3

Exhaust Gas Temperature Sensor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure sensor is properly aligned before tightening.

Diesel Particulate Filter

1

DPF Mounting Bolts

M10 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.

Egr System

1

EGR Valve Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a secure connection to prevent exhaust leaks.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a secure connection to prevent leaks.

Muffler

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a secure connection to prevent leaks.

Heat Shield

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on typical heat shield bolt sizes. Avoid over-tightening to prevent damage.

Exhaust Hanger

1

Exhaust Hanger Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure a secure connection to prevent excessive movement of the exhaust system.

Oxygen Sensor

1

Oxygen Sensor (O2 Sensor) Mounting Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure a secure connection to prevent leaks and ensure accurate sensor readings.

Exhaust Flange

1

Exhaust Flange Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Tighten bolts in a crisscross pattern to ensure even pressure distribution.

Fuel

Torque specifications for Fuel

Fuel Rail and Injector System

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque is necessary to prevent fuel leaks and maintain engine performance.
3

Fuel Injector Rail Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.

Fuel Pump and Tank System

1

Fuel Pump Mounting Bolts

M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque is necessary to prevent fuel leaks and maintain engine performance.
2

Fuel Tank Strap Bolts

M12 x 1.75
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain vehicle safety.

Fuel Filter and Filler System

1

Fuel Filter Bolt/Nut

M12 x 1.75
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
2

Fuel Filler Neck Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque is necessary to prevent fuel leaks and maintain vehicle safety.

Fuel Pressure Regulator and Vent System

1

Fuel Pressure Regulator Mounting Bolts

M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 12 ft-lbs (16 N·m)
Important Notes
Estimated torque values. Consult the vehicle manufacturer's specifications or a repair manual for the correct torque values.
2

Fuel Tank Vent Valve Bolts

M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 12 ft-lbs (16 N·m)
Important Notes
Estimated torque values. Consult the vehicle manufacturer's specifications or a repair manual for the correct torque values.

Fuel Line Fittings

1

Fuel Line Fittings

M12 x 1.75
Torque Specification
1. 15 ft-lbs (20 N·m) 2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque values. Consult the vehicle manufacturer's specifications or a repair manual for the correct torque values.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.

Refrigerant Lines

1

A/C Line Fittings

M8 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Use a torque wrench to avoid overtightening, which can damage fittings.

Cooling System

1

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the housing gasket is properly seated before tightening.
2

Water Pump Bolts

M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensure the water pump is properly aligned with the engine block.
3

Water Pump Pulley Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the pulley is properly aligned with the water pump shaft.

Heater Core

1

Heater Core Inlet/Outlet Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar M6 bolts in the cooling system.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar M6 bolts in the HVAC system.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar M6 bolts in the HVAC system.

Control Valve

1

HVAC Control Valve Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar M6 bolts in the HVAC system.

Suspension

Torque specifications for Suspension

Strut and Shock Absorber Mounting

1

Strut/Shock Absorber Mounting Bolts

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Incorrect torque can lead to uneven tire wear, reduced handling, and compromised safety.

Control Arm and Bushing Mounting

1

Control Arm Bolts

M14 x 1.5
Torque Specification
111 ft-lbs (150 N·m)
Important Notes
Insufficient torque can cause loose control arms, affecting vehicle stability and handling.
2

Upper Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Estimated value based on general industry standards. Consult vehicle manufacturer's specifications for accurate information.
3

Lower Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Estimated value based on general industry standards. Consult vehicle manufacturer's specifications for accurate information.

Steering and Suspension Linkage

1

Ball Joint Nut

M16 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Incorrect torque can lead to loose ball joints, causing uneven tire wear and reduced handling.
2

Tie Rod End Nut

M12 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Insufficient torque can cause loose tie rod ends, affecting vehicle stability and handling.
3

Sway Bar Link Nut

M12 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Incorrect torque can lead to loose sway bar links, compromising vehicle handling and stability.

Steering Knuckle and Coil Spring Mounting

1

Steering Knuckle Bolts

M14 x 1.5
Torque Specification
77 ft-lbs (104 N·m)
Important Notes
Estimated value based on general industry standards. Consult vehicle manufacturer's specifications for accurate information.
2

Coil Spring Mounting Bolts

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Insufficient torque can cause loose coil springs, affecting vehicle stability and handling.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

IS using an impact wrench to tighten bolts recommended?

No, impact wrenches should not be used for final tightening. They can overtighten bolts, leading to stripped threads or bolt failure.

Q2

What IS the proper way to tighten a wheel lug nut?

Use a torque wrench to tighten the lug nuts in a star pattern, following the manufacturer's specified torque value.

Q3

What if I don't have a torque wrench?

If a torque wrench IS unavailable, tighten the bolts as tight as possible by hand, then carefully tighten them further using a breaker bar. Be cautious not to overtighten the bolts.

Q4

What IS the torque specification for the engine's cylinder head bolts?

The cylinder head bolts should be tightened to a torque value of 70 Nm + 90 degrees.

Q5

How often should torque values be checked and reapplied?

Torque values should be checked and reapplied according to the manufacturer's recommended maintenance schedule or if any components have been removed or disturbed.

Q6

What are the consequences of overtightening bolts?

Overtightening bolts can cause the threads to strip, damage the bolt, or even cause the component to fail.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the c-class.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Bolt Torque Specifications

Detailed technical procedure for tightening engine bolts on the Mercedes c-class.

  • Locate the engine bolts that need to be tightened.
  • Clean the bolts and threads with a degreaser.
  • Apply a small amount of threadlocker to the bolts.
  • Tighten the bolts to the specified torque using a digital torque wrench.
  • Check the torque of the bolts once again after they have been tightened.
  • Safety precautions: Always wear safety glasses when working on a vehicle. Use proper lifting equipment when necessary. Do not exceed the specified torque values.
View full procedure

Suspension Bolt Torque Specifications

Technical procedure for tightening suspension bolts on the Mercedes c-class.

  • Locate the suspension bolts that need to be tightened.
  • Clean the bolts and threads with a degreaser.
  • Tighten the bolts to the specified torque using a digital torque wrench.
  • Check the torque of the bolts once again after they have been tightened.
  • Safety precautions: Always wear safety glasses when working on a vehicle. Use proper lifting equipment when necessary. Do not exceed the specified torque values.
View full procedure

Brake Bolt Torque Specifications

Technical procedure for tightening brake bolts on the Mercedes c-class.

  • Locate the brake bolts that need to be tightened.
  • Clean the bolts and threads with a degreaser.
  • Apply a small amount of anti-seize compound to the bolts.
  • Tighten the bolts to the specified torque using a digital torque wrench.
  • Check the torque of the bolts once again after they have been tightened.
  • Safety precautions: Always wear safety glasses when working on a vehicle. Use proper lifting equipment when necessary. Do not exceed the specified torque values.
View full procedure
Technical Service Bulletins

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Mercedes-Benz Specs. All rights reserved.

Privacy Policy Terms of Service