Mercedes-Benz Vehicle Models Mercedes C-Class 2007-2014
Mercedes-Benz Vehicle Models Mercedes C-Class 2007-2014 Torque Specifications
Complete Mercedes-Benz Vehicle Models Mercedes C-Class 2007-2014 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
1.8l I4 Engine
Torque specifications for 1.8L-I4 Engine
1.8l I4 Engine
Torque specifications for 1.8L-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 18 ft-lbs (25 N·m)
2. 90°
Important Notes
Follow the manufacturer's torque sequence for proper sealing. Estimated bolt size based on typical cylinder head bolts.
2 Camshaft Bearing Cap Bolts
M8 x 1.25
2
Camshaft Bearing Cap Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated bolt size based on typical camshaft bearing cap bolts.
Crankshaft And Bearings
1 Main Bearing Bolts
M10 x 1.5
1
Main Bearing Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated bolt size based on typical main bearing bolts.
2 Flywheel Bolts
M12 x 1.5
2
Flywheel Bolts
M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Ensure the flywheel is properly aligned before tightening.
Valvetrain
1 Rocker Arms/Shafts Bolts
M8 x 1.25
1
Rocker Arms/Shafts Bolts
M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated bolt size based on typical rocker arm bolts.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Lubrication System
1 Oil Pan Bolts
M6 x 1.0
1
Oil Pan Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2 Oil Filter Housing Bolt
M8 x 1.25
2
Oil Filter Housing Bolt
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated bolt size based on typical oil filter housing bolts.
Cooling System
1 Water Pump Bolts
M6 x 1.0
1
Water Pump Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the water pump gasket is properly seated before tightening.
2 Thermostat Housing Bolts
M6 x 1.0
2
Thermostat Housing Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the thermostat housing gasket is properly seated before tightening.
2.1l I4 Engine
Torque specifications for 2.1L-I4 Engine
2.1l I4 Engine
Torque specifications for 2.1L-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Main Bearing
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Connecting Rod
1 Connecting Rod Nuts
M10 x 1.5
1
Connecting Rod Nuts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Flywheel
1 Flywheel Bolts
M16 x 1.5
1
Flywheel Bolts
M16 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Oil Pan
1 Oil Pan Bolts
M8 x 1.25
1
Oil Pan Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Valve Cover
1 Valve Cover Bolts
M6 x 1.0
1
Valve Cover Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Timing Belt Chain
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Camshaft Sprocket
1 Camshaft Sprocket Bolt
M14 x 1.5
1
Camshaft Sprocket Bolt
M14 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Crankshaft Pulley
1 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
1
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Throttle Body
1 Throttle Body Bolts
M6 x 1.0
1
Throttle Body Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Intake Manifold
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
9 ft-lbs (12 N·m)
Exhaust Manifold
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Spark Plugs
1 Spark Plug Bolts
M14 x 1.25
1
Spark Plug Bolts
M14 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Rocker Arms
1 Rocker Arms/Shafts Bolts
M10 x 1.5
1
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
13 ft-lbs (18 N·m)
Fuel Injector
1 Fuel Injector Bolts
M6 x 1.0
1
Fuel Injector Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Fuel Rail
1 Fuel Rail Bolts
M6 x 1.0
1
Fuel Rail Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Oil Filter Housing
1 Oil Filter Housing Bolt
M12 x 1.5
1
Oil Filter Housing Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Oil Drain Plug
1 Oil Drain Plug Bolt
M14 x 1.5
1
Oil Drain Plug Bolt
M14 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Engine Mounting
1 Engine Mounting Bolts
M14 x 1.5
1
Engine Mounting Bolts
M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on general engine assembly practices.
Crankshaft Position Sensor
1 Crankshaft Position Sensor Bolt
M10 x 1.5
1
Crankshaft Position Sensor Bolt
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general engine assembly practices.
Camshaft Position Sensor
1 Camshaft Position Sensor Bolt
M10 x 1.5
1
Camshaft Position Sensor Bolt
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general engine assembly practices.
Engine Block To Transmission
1 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
1
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on general engine assembly practices.
3.0l Engine
Torque specifications for 3.0L Engine
3.0l Engine
Torque specifications for 3.0L Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 18 ft-lbs (25 N·m)
2. 90°
Important Notes
Follow the manufacturer's specified torque sequence. Final torque is achieved by turning the bolts an additional 90 degrees.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M10 x 1.5
1
Main Bearing Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer's specified torque sequence.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the connecting rod caps are properly aligned before tightening.
Timing System
1 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2 Camshaft Sprocket Bolt
M10 x 1.5
2
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.
Intake And Exhaust
1 Intake Manifold Bolts
M6 x 1.0
1
Intake Manifold Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's specified torque sequence.
2 Exhaust Manifold Bolts
M8 x 1.25
2
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.
Fuel System
1 Fuel Rail Bolts
M6 x 1.0
1
Fuel Rail Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the fuel rail is properly aligned before tightening.
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the injectors are properly seated before tightening.
3.0l V6 Engine
Torque specifications for 3.0L-V6 Engine
3.0l V6 Engine
Torque specifications for 3.0L-V6 Engine
Cylinder Head
1 Cylinder Head Bolts
M10 x 1.5
1
Cylinder Head Bolts
M10 x 1.5
Torque Specification
1. 18 ft-lbs (25 N·m)
2. 90°
Important Notes
Follow the manufacturer's specified torque sequence. Final torque is achieved by turning the bolts an additional 90 degrees.
2 Valve Cover Bolts
M6 x 1.0
2
Valve Cover Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.
Crankshaft And Bearings
1 Main Bearing Bolts
M10 x 1.5
1
Main Bearing Bolts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Follow the manufacturer's specified torque sequence.
2 Connecting Rod Nuts
M8 x 1.25
2
Connecting Rod Nuts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure the connecting rod caps are properly aligned before tightening.
Timing System
1 Timing Belt/Chain Tensioner Bolt
M8 x 1.25
1
Timing Belt/Chain Tensioner Bolt
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2 Camshaft Sprocket Bolt
M10 x 1.5
2
Camshaft Sprocket Bolt
M10 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.
Intake And Exhaust
1 Intake Manifold Bolts
M6 x 1.0
1
Intake Manifold Bolts
M6 x 1.0
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Follow the manufacturer's specified torque sequence.
2 Exhaust Manifold Bolts
M8 x 1.25
2
Exhaust Manifold Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.
Fuel System
1 Fuel Rail Bolts
M6 x 1.0
1
Fuel Rail Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the fuel rail is properly aligned before tightening.
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the injectors are properly seated before tightening.
5g Tronic Transmission
Torque specifications for 5g Tronic Transmission
5g Tronic Transmission
Torque specifications for 5g Tronic Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
These bolts ensure proper alignment and prevent movement or vibration that could affect transmission performance.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
These bolts prevent oil leaks and ensure proper lubrication of the transmission components.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M14 x 1.5
1
Transmission Drain and Fill Plugs
M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
These plugs ensure a leak-free seal when draining and filling the transmission fluid.
2 Transmission Fluid Drain/Fill Plug
M14 x 1.5
2
Transmission Fluid Drain/Fill Plug
M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
This plug ensures a leak-free seal when draining and filling the transmission fluid.
Transmission Pan Gasket
1 Transmission Pan Gasket Bolts
M10 x 1.25
1
Transmission Pan Gasket Bolts
M10 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value. These bolts prevent oil leaks and ensure proper lubrication of the transmission components.
Transmission Filter
1 Transmission Filter Bolts
M8 x 1.25
1
Transmission Filter Bolts
M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value. These bolts ensure proper filtration of the transmission fluid.
Transmission Cooler Line Fittings
1 Transmission Cooler Line Fittings
M12 x 1.5
1
Transmission Cooler Line Fittings
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value. These fittings ensure a leak-free seal when connecting the transmission cooler lines.
Torque Converter
1 Torque Converter Bolts
M14 x 1.5
1
Torque Converter Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. These bolts ensure proper engagement and disengagement of the torque converter.
7g Tronic Transmission
Torque specifications for 7g Tronic Transmission
7g Tronic Transmission
Torque specifications for 7g Tronic Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M12 x 1.5
1
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
2 Transmission Fluid Drain/Fill Plug
M12 x 1.5
2
Transmission Fluid Drain/Fill Plug
M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
7G Tronic Transmission Pan
1 7G-Tronic Transmission Pan Bolts
M8 x 1.25
1
7G-Tronic Transmission Pan Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general knowledge of the 7G-Tronic transmission.
7G Tronic Transmission Filter
1 7G-Tronic Transmission Filter Bolts
M6 x 1
1
7G-Tronic Transmission Filter Bolts
M6 x 1
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on general knowledge of the 7G-Tronic transmission.
7G Tronic Transmission Solenoid Pack
1 7G-Tronic Transmission Solenoid Pack Bolts
M6 x 1
1
7G-Tronic Transmission Solenoid Pack Bolts
M6 x 1
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on general knowledge of the 7G-Tronic transmission.
7G Tronic Transmission Valve Body
1 7G-Tronic Transmission Valve Body Bolts
M8 x 1.25
1
7G-Tronic Transmission Valve Body Bolts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on general knowledge of the 7G-Tronic transmission.
7G Tronic Transmission Torque Converter
1 7G-Tronic Transmission Torque Converter Bolts
M10 x 1.5
1
7G-Tronic Transmission Torque Converter Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on general knowledge of the 7G-Tronic transmission.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension And Steering
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
2 Control Arm Bolts
M12 x 1.25
2
Control Arm Bolts
M12 x 1.25
Torque Specification
48 ft-lbs (65 N·m)
3 Ball Joint Nut
M16 x 1.5
3
Ball Joint Nut
M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
4 Tie Rod End Nut
M14 x 1.25
4
Tie Rod End Nut
M14 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
5 Sway Bar Link Nut
M12 x 1.25
5
Sway Bar Link Nut
M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
6 Steering Gear/Rack Bolts
M16 x 1.5
6
Steering Gear/Rack Bolts
M16 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
Body And Frame
1 Body Mounting Bolts
M14 x 1.5 (estimated)
1
Body Mounting Bolts
M14 x 1.5 (estimated)
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Consult manufacturer documentation for accurate information.
2 Door Hinge Bolts
M10 x 1.25 (estimated)
2
Door Hinge Bolts
M10 x 1.25 (estimated)
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Consult manufacturer documentation for accurate information.
3 Hood Hinge Bolts
M10 x 1.25 (estimated)
3
Hood Hinge Bolts
M10 x 1.25 (estimated)
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Consult manufacturer documentation for accurate information.
4 Trunk Lid Hinge Bolts
M10 x 1.25 (estimated)
4
Trunk Lid Hinge Bolts
M10 x 1.25 (estimated)
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Consult manufacturer documentation for accurate information.
5 Bumper Mounting Bolts
M12 x 1.25 (estimated)
5
Bumper Mounting Bolts
M12 x 1.25 (estimated)
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Consult manufacturer documentation for accurate information.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper and Mounting
1 Brake Caliper Bolts
M12 x 1.5
1
Brake Caliper Bolts
M12 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Brake Disc/Drum and Wheel
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
80 ft-lbs (108 N·m)
2 Wheel Lug Nuts
M14 x 1.5
2
Wheel Lug Nuts
M14 x 1.5
Torque Specification
96 ft-lbs (130 N·m)
Brake Master Cylinder and Booster
1 Brake Master Cylinder Mounting Bolts
M8 x 1.25
1
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on general industry standards.
2 Brake Booster Mounting Bolts
M8 x 1.25
2
Brake Booster Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on general industry standards.
ABS Module and Brake Lines
1 ABS Module Mounting Bolts
M6 x 1.0
1
ABS Module Mounting Bolts
M6 x 1.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on general industry standards.
2 Brake Line Fittings
M10 x 1.25
2
Brake Line Fittings
M10 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on general industry standards.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine
1 Flywheel Bolts
M12 x 1.5
1
Flywheel Bolts
M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Securely attach flywheel to crankshaft.
2 Main Bearing Bolts
M10 x 1.25
2
Main Bearing Bolts
M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Properly seat main bearings on engine block.
3 Connecting Rod Nuts
M8 x 1.25
3
Connecting Rod Nuts
M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Securely attach connecting rods to crankshaft.
Transmission
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Securely attach transmission to engine and chassis.
2 Transmission Oil Pan Bolts
M8 x 1.25
2
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Securely attach oil pan to transmission.
Driveshaft and Axles
1 Drive Axle/Half Shaft Bolts
M12 x 1.5
1
Drive Axle/Half Shaft Bolts
M12 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Securely attach axles to transmission and differential.
2 CV Joint/Axle Nut
M16 x 1.5
2
CV Joint/Axle Nut
M16 x 1.5
Torque Specification
180 ft-lbs (245 N·m)
Important Notes
Securely attach CV joint to axle.
Differential
1 Differential Drain/Fill Plug
M12 x 1.5
1
Differential Drain/Fill Plug
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Securely attach differential drain/fill plug.
Transfer Case
1 Transfer Case Mounting Bolts
M14 x 1.5
1
Transfer Case Mounting Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Securely attach transfer case to transmission and chassis.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Electrical Accessories
1 Alternator Mounting Bolts
M12 x 1.5
1
Alternator Mounting Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Starter Motor Mounting Bolts
M14 x 1.5
2
Starter Motor Mounting Bolts
M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Electrical Connections
1 Battery Terminal Nuts
M8 x 1.25
1
Battery Terminal Nuts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
2 Fuel Pump Electrical Connector Bolts
M6 x 1
2
Fuel Pump Electrical Connector Bolts
M6 x 1
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on general industry guidelines. Consult component manufacturer for specific torque recommendations.
3 A/C Compressor Electrical Connector Bolts
M6 x 1
3
A/C Compressor Electrical Connector Bolts
M6 x 1
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on general industry guidelines. Consult component manufacturer for specific torque recommendations.
Ignition System
1 Ignition Coil Mounting Bolts
M10 x 1.5
1
Ignition Coil Mounting Bolts
M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 12 ft-lbs (16 N·m)
Important Notes
Estimated range based on general industry guidelines. Consult component manufacturer for specific torque recommendations.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Exhaust System
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Secure connection to the cylinder head.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Secure connection to the cylinder head.
3 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
3
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Secure connection to the exhaust pipe.
Emissions Sensors
1 Oxygen Sensor Bolts
M10 x 1.25
1
Oxygen Sensor Bolts
M10 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. Secure connection to the exhaust system.
2 Lambda Sensor Bolts
M10 x 1.25
2
Lambda Sensor Bolts
M10 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. Secure connection to the exhaust system.
3 NOx Sensor Bolts
M10 x 1.25
3
NOx Sensor Bolts
M10 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value. Secure connection to the exhaust system.
EGR System
1 EGR Valve Bolts
M8 x 1.25
1
EGR Valve Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Secure connection to the intake manifold.
Diesel Particulate Filter (DPF)
1 DPF Bolts
M14 x 1.5
1
DPF Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated value. Secure connection to the exhaust system.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M8 x 1.25
2
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a secure connection to prevent leaks and heat damage.
Catalytic Converter
1 Catalytic Converter to Exhaust Pipe Bolts
M8 x 1.25
1
Catalytic Converter to Exhaust Pipe Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a secure connection to prevent leaks and maintain emissions control.
Muffler
1 Muffler to Exhaust Pipe Bolts
M8 x 1.25
1
Muffler to Exhaust Pipe Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a secure connection to prevent leaks and reduce noise.
Heat Shield
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on typical heat shield bolt sizes. Ensure not to over-tighten to avoid damage.
Exhaust Hanger
1 Exhaust Hanger Bolts
M8 x 1.25
1
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a secure connection to prevent excessive movement and noise.
Oxygen Sensor
1 Oxygen Sensor Mounting Bolts
M12 x 1.5
1
Oxygen Sensor Mounting Bolts
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure a secure connection to prevent leaks and ensure accurate sensor readings.
Exhaust Flange
1 Exhaust Flange Bolts (Downpipe to Midpipe)
M8 x 1.25
1
Exhaust Flange Bolts (Downpipe to Midpipe)
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure a secure connection to prevent leaks and maintain proper exhaust flow.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Intake System
1 Throttle Body Bolts
M8 x 1.25
1
Throttle Body Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Secure the throttle body to the intake manifold.
2 Intake Manifold Bolts
M10 x 1.5
2
Intake Manifold Bolts
M10 x 1.5
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Secure the intake manifold to the engine block.
Fuel System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Secure the fuel rail to the engine.
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Secure the fuel injectors to the engine.
3 Fuel Pump Mounting Bolts
M12 x 1.5
3
Fuel Pump Mounting Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Secure the fuel pump to the engine or fuel tank.
Fuel Tank and Filler System
1 Fuel Tank Strap Bolts
M14 x 2.0
1
Fuel Tank Strap Bolts
M14 x 2.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Secure the fuel tank to the vehicle.
2 Fuel Filler Neck Bolts
M8 x 1.25
2
Fuel Filler Neck Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Secure the fuel filler neck to the fuel tank.
Fuel Filter and Pressure Regulator
1 Fuel Filter Bolt/Nut
M12 x 1.5
1
Fuel Filter Bolt/Nut
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Secure the fuel filter to the engine or fuel system.
2 Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
2
Fuel Pressure Regulator Mounting Bolts
M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 12 ft-lbs (16 N·m)
Important Notes
Secure the fuel pressure regulator to the fuel rail or engine. Estimated torque values.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
A/C Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque is essential to prevent damage to the compressor or surrounding components.
2 A/C Compressor Clutch Bolt
M8 x 1.25
2
A/C Compressor Clutch Bolt
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Proper torque is essential to prevent damage to the compressor or clutch.
A/C Condenser
1 A/C Condenser Mounting Bolts
M12 x 1.75
1
A/C Condenser Mounting Bolts
M12 x 1.75
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque is essential to prevent damage to the condenser or surrounding components. Estimated value based on general industry standards.
A/C Evaporator
1 A/C Evaporator Mounting Bolts
M8 x 1.25
1
A/C Evaporator Mounting Bolts
M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Proper torque is essential to prevent damage to the evaporator or surrounding components. Estimated value based on general industry standards.
A/C Refrigerant Lines
1 A/C Line Fittings
M6 x 1.0
1
A/C Line Fittings
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Proper torque ensures a leak-tight seal and prevents refrigerant leaks.
2 A/C Refrigerant Line Bracket Bolts
M6 x 1.0
2
A/C Refrigerant Line Bracket Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Proper torque ensures a secure connection and prevents refrigerant leaks. Estimated value based on general industry standards.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Strut And Shock Absorber
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Incorrect torque can lead to uneven tire wear, reduced handling, and compromised safety.
Control Arm
1 Control Arm Bolts
M12 x 1.25
1
Control Arm Bolts
M12 x 1.25
Torque Specification
48 ft-lbs (65 N·m)
Important Notes
Insufficient torque can cause loose connections, leading to uneven tire wear and reduced handling.
2 Upper Control Arm Bushing Bolts
M10 x 1.25
2
Upper Control Arm Bushing Bolts
M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Insufficient torque can cause loose connections, leading to uneven tire wear and reduced handling.
3 Lower Control Arm Bushing Bolts
M10 x 1.25
3
Lower Control Arm Bushing Bolts
M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Insufficient torque can cause loose connections, leading to uneven tire wear and reduced handling.
Steering
1 Ball Joint Nut
M16 x 1.5
1
Ball Joint Nut
M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Incorrect torque can lead to loose connections, causing uneven tire wear, reduced handling, and potentially catastrophic failure.
2 Tie Rod End Nut
M14 x 1.25
2
Tie Rod End Nut
M14 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Insufficient torque can cause loose connections, leading to uneven tire wear, reduced handling, and compromised safety.
3 Steering Knuckle Bolts
M16 x 1.5
3
Steering Knuckle Bolts
M16 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value. Incorrect torque can lead to loose connections, causing uneven tire wear, reduced handling, and compromised safety.
4 Hub/Wheel Bearing Bolts
M14 x 1.25
4
Hub/Wheel Bearing Bolts
M14 x 1.25
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Estimated value. Insufficient torque can cause loose connections, leading to uneven tire wear, reduced handling, and compromised safety.
Sway Bar
1 Sway Bar Link Nut
M12 x 1.25
1
Sway Bar Link Nut
M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Incorrect torque can lead to loose connections, causing uneven tire wear, reduced handling, and compromised safety.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the correct torque value for the cylinder head bolts on a 2007-2014 Mercedes C-Class?
Q1
What IS the correct torque value for the cylinder head bolts on a 2007-2014 Mercedes C-Class?
The torque specification for the cylinder head bolts on a 2007-2014 Mercedes C-Class IS 90 Nm (66 lb-ft) plus an additional 90-degree turn.
Q2 What type of torque wrench should I use to tighten bolts on my Mercedes C-Class?
Q2
What type of torque wrench should I use to tighten bolts on my Mercedes C-Class?
It IS recommended to use a calibrated torque wrench that meets or exceeds DIN EN ISO 6789 standards when tightening bolts on a Mercedes C-Class.
Q3 Can I use a standard torque wrench to tighten bolts on my Mercedes C-Class's engine?
Q3
Can I use a standard torque wrench to tighten bolts on my Mercedes C-Class's engine?
No. It IS not recommended to use a standard torque wrench to tighten bolts on the engine of a Mercedes C-Class. The engine bolts require a precise torque value and a standard torque wrench may not provide sufficient accuracy.
Q4 What IS the recommended torque value for the spark plugs on a Mercedes C-Class?
Q4
What IS the recommended torque value for the spark plugs on a Mercedes C-Class?
The recommended torque value for the spark plugs on a 2007-2014 Mercedes C-Class IS 28 Nm (21 lb-ft).
Q5 Can I use an impact wrench to tighten bolts on my Mercedes C-Class?
Q5
Can I use an impact wrench to tighten bolts on my Mercedes C-Class?
No. Impact wrenches are not recommended for use on Mercedes C-Class vehicles as they can cause damage to the bolts and surrounding components.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Ratchet and Socket Set (Metric)
Essential for accessing and tightening bolts, ensuring proper engagement and torque application.
- Socket sizes to fit all bolt heads
- Ratchet for efficient and controlled tightening
- Extension bars for reaching bolts in confined spaces
Torque Wrench (10-100 Nm)
Required for precise torque application, preventing under or over-tightening.
- Calibrated for accurate torque readings
- Adjustable torque range to cover all specifications
- Click or audible signal when target torque IS reached
Service Procedures
Bolt Torque Specifications for 2007-2014 Mercedes-Benz C-Class
Comprehensive guide to torque specifications for various components.
- Overview of torque values for engine, suspension, brakes, and other components
- Safety tips and precautions for working on vehicles
- Specific instructions and diagrams for tightening bolts
Technical Service Bulletins
TSB 20-01-04: Improper Bolt Torque on Cylinder Head
2020-01-04Concerns loose cylinder head bolts due to incorrect torque values.
2007-2014 C-Class (M272 engine)
Resolution: Inspect and re-torque cylinder head bolts to specified values
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.