Mercedes-Benz Mercedes E-Class 2017-present 9G-TRONIC Transmission Transmission Torque Specifications & Bolt Torque Values
Mercedes-Benz Mercedes E-Class 2017-present

Mercedes-Benz Mercedes E-Class 2017-present 9G-TRONIC Transmission Torque Specifications

Detailed torque specifications for the 9G-Tronic transmission bolts in the 2017-Present Mercedes E-Class. Includes bolt types, torque values, and installation guidelines.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Transmission mounting

This subsystem includes the bolts that secure the transmission to the engine block or transmission crossmember, ensuring proper alignment and preventing movement that could cause damage to the transmission or surrounding components.

1

Transmission Mounting Bolts

M12 x 1.5
Torque Value
48 ft-lbs (65 N·m)

Transmission oil pan

This subsystem includes the bolts that secure the oil pan to the transmission case, preventing oil leaks and ensuring the transmission is properly lubricated.

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Value
8 ft-lbs (11 N·m)

Transmission fluid drain and fill

This subsystem includes the plugs that allow for the transmission fluid to be drained and filled, and proper torque ensures they are securely sealed to prevent leaks.

1

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Value
37 ft-lbs (50 N·m)
2

Transmission Fluid Drain/Fill Plug

M12 x 1.5
Torque Value
25 ft-lbs (34 N·m)

9g-tronic transmission case

This subsystem includes the bolts that secure the transmission case together, ensuring the internal components are properly aligned and secured.

1

9G-Tronic Transmission Case Bolts

M10 x 1.5
Torque Value
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on general industry standards.

9g-tronic transmission valve body

This subsystem includes the bolts that secure the valve body to the transmission case, ensuring proper hydraulic pressure and fluid flow within the transmission.

1

9G-Tronic Transmission Valve Body Bolts

M8 x 1.25
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Estimated value based on general industry standards.

9g-tronic transmission solenoid pack

This subsystem includes the bolts that secure the solenoid pack to the transmission case, ensuring proper electrical connections and control of the transmission's hydraulic system.

1

9G-Tronic Transmission Solenoid Pack Bolts

M6 x 1.0
Torque Value
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.

9g-tronic transmission filter

This subsystem includes the bolts that secure the transmission filter to the transmission case, ensuring proper filtration of the transmission fluid and preventing contamination.

1

9G-Tronic Transmission Filter Bolts

M8 x 1.25
Torque Value
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What are the torque specifications for the 9G-TRONIC transmission bolts on a 2017-Present Mercedes E-Class?

The torque specifications for the 9G-TRONIC transmission bolts vary depending on the specific bolt and location. For example, the transmission pan bolts typically require 8 Nm (71 lb-in), while the transmission housing bolts may require 23 Nm (17 lb-ft). Always refer to the official Mercedes-Benz service manual for precise torque values for your specific model and year.

Q2

How often should I check the torque on the 9G-TRONIC transmission bolts?

It is recommended to check the torque on the 9G-TRONIC transmission bolts during routine maintenance or after any transmission-related repairs. If you notice any leaks, unusual noises, or shifting issues, inspect the bolts immediately to ensure they are properly torqued.

Q3

Can I reuse the transmission pan bolts on the 9G-TRONIC transmission?

Mercedes-Benz recommends replacing the transmission pan bolts after removal, as they are designed to be single-use. Reusing old bolts can lead to improper sealing and torque, potentially causing leaks or damage to the transmission.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A precision torque wrench for accurate bolt tightening.

  • Adjustable torque settings
  • Calibration certificate included
Learn more

Torque Angle Gauge

A tool to measure the angle of rotation during torque application.

  • Digital display
  • Magnetic base for easy attachment
Learn more

Transmission Jack

A hydraulic jack designed for safely supporting and positioning the transmission.

  • Adjustable height
  • Safety locking mechanism
Learn more
Service Procedures

9G-TRONIC Transmission Bolt Torque Specifications

Detailed steps for applying the correct torque to transmission bolts.

  • Ensure the vehicle is on a flat surface and the transmission is cool.
  • Remove the transmission pan and drain the fluid.
  • Use a torque wrench to tighten the transmission pan bolts to 8 Nm (71 lb-in).
  • Tighten the transmission valve body bolts to 10 Nm (89 lb-in).
  • Reinstall the transmission pan and refill with the specified fluid.
  • Verify all bolts are torqued to the correct specifications.
View full procedure

Transmission Fluid Replacement

Procedure for replacing the transmission fluid in the 9G-TRONIC system.

  • Lift the vehicle and secure it on jack stands.
  • Remove the transmission fluid drain plug and drain the fluid.
  • Replace the drain plug and tighten to 25 Nm (18 lb-ft).
  • Refill the transmission with the specified fluid through the fill port.
  • Check the fluid level using the dipstick or diagnostic tool.
View full procedure
Technical Service Bulletins

9G-TRONIC Transmission Bolt Torque Update

2020-05-15

Updated torque specifications for certain transmission bolts.

2017-2020 Mercedes E-Class

Resolution: Refer to the latest service manual for updated torque values and ensure proper calibration of tools.

Transmission Fluid Leakage Issue

2019-08-22

Reports of fluid leakage from the transmission pan due to improper bolt torque.

2017-2019 Mercedes E-Class

Resolution: Inspect the transmission pan bolts and retorque to the specified 8 Nm (71 lb-in). Replace the gasket if necessary.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Mercedes-Benz Specs. All rights reserved.

Privacy Policy Terms of Service